Automotive Starter Relay
- 80A switching capability
- Dust protected type and sealed type available
- Outline dimensions: 26.0X26.0X24.5mm
Top Features of Foocles Automotive Starter Relay
We have obtained UL certification for this FLS833 auto relay specifically for global promotion.
This automotive relay is designed to withstand the current surge at startup.
Its compact size allows for easy installation in portable jump starter tools.
Specially designed for emergency start-up, with a variety of customized models available on the market.
Auto Start Relay
As a high amperage relay, it is not only used in automotive power systems, but also widely used in jump starter cable to counteract high currents during startup.
- Specification
- Coil Ratings
| Contact Form | 1A |
| Contact Material | Agsno2In |
| Max,Operating Current | 80A |
| Max.Operating Voltage | 27VDC |
| Rated Load（Resistive load） | 1A: 80A 13.5VDC 50A 27VDC |
| Insulation Resistance | 100MΩ |
| Dielectric Strength（Coil and Contact） | 500VAC/M |
| Ambient Temperature | -40°C~+85°C |
| Operate/Release Time | ≤10ms |
| Release Time | ≤5ms |
| Mechanical Life | 1 X106 |
| Electrical Life | 1 X105 |
| Terminal Type | QC Terminal |
|
| Rated voltage (VDC) | Operate Voltage (VDC) | Release voltage (VDC) | Coil Resistance (Ω±10%) | Parallel Resistance (Ω±5%) | Equivalent Resistance (Ω±10%) | Coil Power (W) | Maximum coil voltage (VDC) | |
| 20 °C | 85°C | ||||||||
| Standard | 12 | ≤8.4 | ≥1.2 | 80 | – | – | 1.8 | 20.2 | 15.7 |
| 12 | ≤8.4 | ≥1.2 | 80 | 680 | 71.6 | 2.0 | 20.2 | 15.7 | |
| 24 | ≤16.8 | ≥2.4 | 320 | – | – | 1.8 | 40.5 | 31.5 | |
| 24 | ≤16.8 | ≥2.4 | 320 | 2700 | 286 | 2.0 | 40.5 | 31.5 | |
| Low Power | 12 | ≤8.4 | ≥1.2 | 90 | – | – | 1.6 | 20.2 | 15.7 |
| 12 | ≤8.4 | ≥1.2 | 90 | 680 | 79.5 | 1.8 | 20.2 | 15.7 | |
| 24 | ≤16.8 | ≥2.4 | 360 | – | – | 1.6 | 40.5 | 31.5 | |
| 24 | ≤16.8 | ≥2.4 | 360 | 2700 | 317.6 | 1.8 | 40.5 | 31.5 | |
Ordering Guide
Outline Dimensions
Remark: In case of no tolerance shown in outline dimension: outline dimension≤1mm, tolerance should be ±0.2mm;
Outline dimension＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension＞5mm, tolerance should be ±0.4mm.
Wiring Diagram (Bottom View)
