Automotive Starter Relay
- 200A Super Current Relay
- Mainly used for large machines, motor start-up
- 200A is safer, more reliable
Top Features of Foocles Starter Relay
Delivers the powerful current required for vehicle starting, enhancing starting efficiency.
Foocles starter relays are manufactured under the IATF 16949 system and have all passed CE product certification.
All you need is an M10 wrench to easily install the relay onto the vehicle.
Our pricing is based solely on costs and labor, with no brand premium added.
Safe and Stable Vehicle Startup
Each relay undergoes quality inspection to prevent defective units from affecting the normal operation of automotive electrical systems.
- Coil Parameter
- Operation Condition
- Contact Data
| Dash numbers | Coil voltage（VDC） | Coil resistance (Ω±10%) | Pickup voltage VDC（max.） | Release voltage VDC（min.） | Coil Power | Operate Time | Release Time | |
| Rated | Max. | |||||||
| 12V 2.4W | 12 | 15.6 | 60 | 8.5 | 1.2 | 2.4W | ≤10ms | ≤5ms |
| 24V 2.4W | 24 | 31.2 | 240 | 17 | 2.4 | 2.4W | ||
| 12V 4.8W | 12 | 15.6 | 30 | 8.5 | 1.2 | 4.8W | ≤10ms | ≤5ms |
| 24V 4.8W | 24 | 31.2 | 120 | 17 | 2.4 | 4.8W | ||
| Insulation | 100MΩ min(at 500VDC) | |
| Dielectric strength | Between contacts | 50Hz 500V |
| Between coil and contacts | 50Hz 500V | |
| Shock resistance | 147m/s² | |
| Vibration resistance | 10-40Hz double amplitude 1.5mm | |
| Terminals strength | 20N | |
| Solderability | 235℃±2℃ 3±0.5s | |
| Ambient temperature | -40℃~+85℃ | |
| Relative humidity | 85%(at 40℃) | |
| Mass | 110g | |
| Contact form | 1A(SPSTNO) |
| Contact material | AgSnO2 |
| Contact rating(resistive) | 200A/14VDC |
| 100A/28VDC | |
| Max.Switching voltage | 40VDC |
| Max.switching current | 200A |
| Max.switching power | 2800W |
| Contact resistance | ≤100mΩ |
| Electrical life | 5*104 |
| Mechanical life | 1*106 |
Ordering Guide
Outline Dimensions
Remark: In case of no tolerance shown in outline dimension: outline dimension≤1mm, tolerance should be ±0.2mm;
Outline dimension＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension＞5mm, tolerance should be ±0.4mm.
Wiring Diagram (Bottom View)
